Electrochemistry Revision NCERT Class 12 Chemistry

Electrochemistry Revision Q&A (NCERT Class 12 Chemistry) - Chemca

Electrochemistry Revision Q&A

NCERT Class 12 Chemistry • Study Guide & MCQ Quiz

Class 12 JEE / NEET

Short Answer Q&A (100 Questions)

  1. Q1: Define Electrochemistry.
    A: The study of the relationship between chemical energy and electrical energy.
  2. Q2: What is an electrochemical cell?
    A: A device that converts chemical energy into electrical energy or vice-versa.
  3. Q3: What is a Galvanic (or Voltaic) cell?
    A: A cell where a spontaneous redox reaction generates electrical energy.
  4. Q4: What is an Electrolytic cell?
    A: A cell where electrical energy is used to drive a non-spontaneous chemical reaction.
  5. Q5: What is the sign of the anode in a Galvanic cell?
    A: Negative (site of oxidation).
  6. Q6: What is the sign of the anode in an Electrolytic cell?
    A: Positive (site of oxidation).
  7. Q7: What is the function of a salt bridge?
    A: To complete the inner circuit and maintain the electrical neutrality of the solutions.
  8. Q8: Define EMF of a cell.
    A: The maximum potential difference between two electrodes when no current is drawn.
  9. Q9: Write the relation between ΔrG° and E°cell.
    A: ΔrG° = -nFE°cell.
  10. Q10: What is the unit of conductance (G)?
    A: Siemens (S) or ohm-1.
  11. Q11: What is the unit of conductivity (κ)?
    A: Siemens per meter (S m-1) or S cm-1.
  12. Q12: Define cell constant (G*).
    A: The ratio of distance between electrodes (l) to the area of cross-section (A). (G* = l/A).
  13. Q13: How does conductivity of an electrolyte vary with dilution?
    A: It decreases (due to fewer ions per unit volume).
  14. Q14: How does molar conductivity (Λm) of a strong electrolyte vary with dilution?
    A: It increases slightly (due to decreased inter-ionic attraction).
  15. Q15: State Kohlrausch's Law.
    A: At infinite dilution, each ion contributes independently to the total molar conductivity.
  16. Q16: How is the degree of dissociation (α) calculated for a weak electrolyte?
    A: α = Λm / Λm°.
  17. Q17: Write the simplified Nernst equation at 298 K.
    A: Ecell = E°cell - (0.0591/n) log Q.
  18. Q18: What is the value of Ecell at equilibrium?
    A: Zero (Ecell = 0).
  19. Q19: Write the relation between E°cell and the equilibrium constant (Kc).
    A: E°cell = (0.0591/n) log Kc (at 298 K).
  20. Q20: State Faraday's First Law of Electrolysis.
    A: Mass deposited is directly proportional to the quantity of electricity passed (W ∝ Q).
  21. Q21: What is the value of Faraday constant (F)?
    A: 96487 C mol-1.
  22. Q22: How many moles of electrons are required to deposit 1 mol of Ca from Ca2+?
    A: 2 moles of electrons (2F).
  23. Q23: Define Primary Battery.
    A: A battery that cannot be recharged once the chemicals are exhausted.
  24. Q24: Give an example of a primary battery.
    A: Dry cell (Leclanché cell) or Mercury cell.
  25. Q25: Define Secondary Battery.
    A: A battery that can be recharged by passing current in the reverse direction.
  26. Q26: Give an example of a secondary battery.
    A: Lead storage battery or Nickel-Cadmium cell.
  27. Q27: What is the overall cell reaction in a Mercury cell?
    A: Zn(Hg) + HgO(s) → ZnO(s) + Hg(l).
  28. Q28: Why is the voltage of a mercury cell constant throughout its life?
    A: Because the overall reaction does not involve any ion whose concentration changes.
  29. Q29: What is the electrolyte in a lead storage battery?
    A: 38% solution of H2SO4.
  30. Q30: What is the material of the anode in a fully discharged lead storage battery?
    A: Lead sulphate (PbSO4).
  31. Q31: Define a Fuel cell.
    A: A Galvanic cell that converts the energy of combustion of fuels directly into electrical energy.
  32. Q32: Give an example of a fuel cell.
    A: H2-O2 Fuel Cell.
  33. Q33: What is the by-product of an H2-O2 fuel cell?
    A: Water (H2O).
  34. Q34: What is Corrosion?
    A: The slow decay of a metal due to its reaction with air and moisture (an electrochemical process).
  35. Q35: Write the chemical formula of rust.
    A: Fe2O3·xH2O (Hydrated ferric oxide).
  36. Q36: What is Galvanisation?
    A: Coating iron with a layer of Zinc to prevent rusting.
  37. Q37: Name the electrode whose standard potential is conventionally taken as zero.
    A: Standard Hydrogen Electrode (SHE).
  38. Q38: What is the cell reaction at the anode during the discharge of a dry cell?
    A: Zn(s) → Zn2+ + 2e-.
  39. Q39: What happens to ΔrG when Ecell is positive?
    A: ΔrG is negative (spontaneous).
  40. Q40: What is the condition for a non-spontaneous cell reaction?
    A: Ecell is negative (or ΔrG is positive).
  41. Q41: Why is the corrosion of iron quicker in saline water?
    A: Salt acts as an electrolyte, increasing the conductivity and rate of the electrochemical process.
  42. Q42: Why does Λm of weak electrolytes increase steeply on dilution?
    A: Due to the increase in the degree of dissociation (α).
  43. Q43: Which metal is a stronger reducing agent, A (E° = -2.5 V) or B (E° = -1.0 V)?
    A: Metal A (more negative E°).
  44. Q44: How is the potential of a single electrode measured?
    A: By connecting it to the SHE to form a complete cell.
  45. Q45: What is the minimum voltage required for the electrolysis of water?
    A: E°cell ≈ -1.23 V.
  46. Q46: What is the relationship between resistance (R) and cell constant (G*)?
    A: κ = G*/R.
  47. Q47: What is the unit of the cell constant (G*) in SI units?
    A: m-1.
  48. Q48: What does Λm° represent?
    A: Limiting molar conductivity (molar conductivity at infinite dilution).
  49. Q49: Give the SI unit of Λm.
    A: S m2 mol-1.
  50. Q50: What is the role of ZnCl2 in a dry cell?
    A: It forms a complex with NH3 to prevent pressure build-up.
  51. Q51: State Faraday's Second Law in terms of equivalent mass (E).
    A: Mass deposited (W) is proportional to equivalent mass (W ∝ E) for the same Q.
  52. Q52: What is the charge required for the reduction of 1 mol of MnO4- to Mn2+?
    A: 5 Faradays (5F).
  53. Q53: What is the formula to calculate the mass deposited (W)?
    A: W = ZIT, where Z is the electrochemical equivalent.
  54. Q54: What is electrochemical equivalent (Z)?
    A: The mass of the substance deposited by 1 C of charge (Z = E/F).
  55. Q55: What is the anode in the H2-O2 fuel cell?
    A: Porous carbon rod through which H2 gas is passed.
  56. Q56: What is the electrolyte in the H2-O2 fuel cell?
    A: Hot aqueous KOH or NaOH.
  57. Q57: What metal is used for sacrificial protection of iron?
    A: Zinc (Zn).
  58. Q58: Name a noble metal used as an electrode in SHE.
    A: Platinum (Pt).
  59. Q59: What is the standard concentration for ions in E°?
    A: 1 M (Molar).
  60. Q60: What is the standard pressure for gases in E°?
    A: 1 bar (or 1 atm).
  61. Q61: What does the notation Zn | Zn2+ represent?
    A: A half-cell of zinc metal dipped in Zn2+ solution.
  62. Q62: What does the double vertical line (||) represent in cell notation?
    A: A salt bridge or porous partition separating two half-cells.
  63. Q63: Write the cell notation for the Daniell cell.
    A: Zn(s) | Zn2+(aq) || Cu2+(aq) | Cu(s).
  64. Q64: Give one reason why Li is the strongest reducing agent in aqueous solution.
    A: Extremely high hydration energy of the Li+ ion.
  65. Q65: What is the condition for Ecell > 0?
    A: ΔrG < 0 and Kc > 1.
  66. Q66: What happens to the pH near the cathode during the electrolysis of aqueous NaCl?
    A: It increases (becomes basic due to OH- formation).
  67. Q67: What is the primary product at the anode during the electrolysis of aqueous NaCl?
    A: Cl2 gas.
  68. Q68: What is the primary product at the cathode during the electrolysis of aqueous NaCl?
    A: H2 gas.
  69. Q69: What does the term electrolysis of brine refer to?
    A: Electrolysis of concentrated aqueous NaCl solution.
  70. Q70: What happens to the concentration of H2SO4 during the recharging of a lead storage battery?
    A: It increases.
  71. Q71: What is the general term for the current-carrying ability of a metallic wire?
    A: Metallic (or Electronic) Conductance.
  72. Q72: How is Λm related to C (concentration) for a strong electrolyte? (Debye-Hückel-Onsager equation)
    A: Λm = Λm° - A√C.
  73. Q73: Why does the molar conductivity of strong electrolytes not increase sharply on dilution?
    A: They are already completely dissociated at all concentrations.
  74. Q74: What is the role of the Pt electrode in SHE?
    A: It provides a surface for the reaction and for the transfer of electrons.
  75. Q75: What is the major disadvantage of a dry cell?
    A: It is an acidic cell, which corrodes the Zn casing.
  76. Q76: What determines the extent of electronic conductance in a metal?
    A: The number of valence electrons per atom.
  77. Q77: How does temperature affect electronic conductance?
    A: It decreases with an increase in temperature.
  78. Q78: Give one example of a weak electrolyte.
    A: CH3COOH (Acetic acid).
  79. Q79: Give one example of a strong electrolyte.
    A: NaCl (Sodium chloride).
  80. Q80: Which process is faster: rusting in moist air or rusting in saltwater?
    A: Rusting in saltwater (due to higher electrolyte content).
  81. Q81: Write the cell reaction for the charging of a lead storage battery.
    A: 2PbSO4(s) + 2H2O(l) → Pb(s) + PbO2(s) + 2H2SO4(aq).
  82. Q82: What is the approximate voltage of a single lead storage cell?
    A: 2 V (A typical car battery has 6 cells for 12 V).
  83. Q83: What is the maximum work obtained from a Galvanic cell?
    A: The decrease in Gibbs free energy (ΔrG).
  84. Q84: Define electrochemical series.
    A: The arrangement of various half-cells in order of their increasing standard reduction potentials.
  85. Q85: What is the property of elements that have a high negative E°?
    A: They are strong reducing agents.
  86. Q86: What is the property of elements that have a high positive E°?
    A: They are strong oxidizing agents.
  87. Q87: Can you store AgNO3 solution in a Cu vessel? (E°Ag+/Ag > E°Cu2+/Cu)
    A: No, Cu will spontaneously displace Ag (positive Ecell).
  88. Q88: What is the role of a solid electrolyte in a fuel cell?
    A: To facilitate the migration of ions between the electrodes.
  89. Q89: What is the electrode material of the cathode in a dry cell?
    A: Carbon rod (C) surrounded by MnO2 and carbon powder.
  90. Q90: What is the reaction quotient (Q)?
    A: The ratio of product concentrations to reactant concentrations raised to their stoichiometric powers, at any point.
  91. Q91: At what temperature is the simplified Nernst equation (with 0.0591) valid?
    A: 298 K (or 25 °C).
  92. Q92: Name the force that drives electrons in the external circuit.
    A: Electromotive Force (EMF).
  93. Q93: Which electrode is the site of Cl2 evolution during the electrolysis of molten NaCl?
    A: Anode (Cl- → ½Cl2 + e-).
  94. Q94: What is the common name for the reaction Fe2+ → Fe3+ + e-?
    A: Oxidation of ferrous to ferric ion.
  95. Q95: Why are strong electrolytes like KCl used in salt bridges?
    A: Because the mobility of the cation (K+) and anion (Cl-) are nearly the same.
  96. Q96: If ΔrG° = 0, what is the value of E°cell?
    A: Zero (E°cell = 0).
  97. Q97: How much electricity is needed to obtain 1 mol of Al from Al2O3 by electrolysis?
    A: 3 Faradays (3F).
  98. Q98: Define Concentration Cell.
    A: A Galvanic cell in which the two half-cells have the same electrodes but different concentrations of the electrolyte.
  99. Q99: What technique is used to prevent corrosion by connecting the metal to a more easily oxidizable metal?
    A: Cathodic protection (or Sacrificial protection).
  100. Q100: What is the term for the decrease in EMF due to the formation of gas bubbles around the electrode?
    A: Polarization.

Practice Quiz (30 MCQs)

Electrochemistry Learning Hub

Study galvanic cells, Nernst equation, conductivity, Kohlrausch law, electrolysis and batteries in one comprehensive guide.

Master Complete Electrochemistry →
📝 Ultimate Revision Hub

📚 Best Chemistry Revision Notes for JEE, NEET & Boards

Revise Chemistry the smart way with concise, chapter-wise revision notes covering Class 11, Class 12, JEE Main, JEE Advanced, NEET and Board Exams. Strengthen concepts, revise key formulas, important reactions and high-weightage topics with easy-to-understand notes designed for quick exam preparation.

🚀 Explore the Complete Chemistry Revision Notes Hub

3 comments:

  1. Anonymous11:22

    Good for revision

    ReplyDelete
  2. Anonymous11:37

    Thank you sir, your teaching method is superb,, it's really helpful for each and every student,, thankyou for your effort sir 😊

    ReplyDelete
  3. Great set of questions.. thanks

    ReplyDelete